Eitan Q Core Sapphire, Руководство пользователя

Страница: 206 / 294

Sapphire Infusion Pump User Manual 205
Authorization
level Sets the authorization lock level of the
pump. For more information, refer to
Managing Authorization Levels
on page
220
.
Select Authorization
level
. Then, enter a
password and select Low ,
Medium
,
High
or
Tech
.
Allow delayed
start Enables users to start an infusion at a later
time. The user may either define a specific
delay period, or set the pump to Standby.
For more information, refer to
Using the Set
Delay Feature
on page
227
.
Select the Allow
delayed start
row, to
toggle the option between
On and Off .
Set prime volume The amount of fluid used to prime the
administration set when automatic priming
is performed. The acceptable range is 2 to
25 mL.
Select Set prime
volume
. Then, using the
keypad, enter the desired
value

OK .
Backlight Allows the user to set the degree of screen
brightness for a running infusion. Backlight
can also be modified during a running
infusion. The Off and Partial options of this
feature save power and promote longer
battery life.
Select Backlight . Then,
select
On
,
Off
or
Partial
.
Prime Reminder Enables a reminder for the user to prime
the administration set before starting an
infusion.
For more information, refer to
Automatic
Priming Using the Pump
on page
90
.
Select the Prime
Reminder
row, to toggle
the option between On
and
Off
.
Option Descriptions/Notes
To Modify Parameter
(from the General
settings screen)