Eitan Q Core Sapphire, Руководство пользователя

Страница: 196 / 294

Sapphire Infusion Pump User Manual 195
> To u n l o c k t h e s c re e n :
1.
From the toolbar, press
Press to Unlock Screen
.
2.
From the toolbar of the Attention screen, press
OK
.
Activating Patient Lockout
The Patient Lockout feature prevents unauthorized personnel from modifying pump
and infusion settings. In this state, only limited features are available. A password is
required to unlock the pump.
> To a c t i v a t e P a t i e n t L o c k o u t :
1.
From the toolbar of the Running screen, press
Lock
.
2.
On the Lock options screen, select
Patient lockout
.
> To re l e a s e P a t i e n t L o c k o u t :
1.
From the toolbar, press
Press to Unlock Patient
.
2.
Using the keypad, enter the relevant password and press
OK
.
Ending Infusion
When the infusion is complete (entire programmed VTBI delivered), the pump
automatically activates the KVO (the default or the infusion rate, the lower of the two)
and displays the infusion summary:
•
VI - volume infused (VI for the current completed infusion. If the Accumulated VI
has been cleared during this infusion, VI presents the volume infused from that
time on).
During Patient Lockout or screen lock, the
Request Pause
function key is not available. Pause the infusion by pressing the
Stop hard key. (Refer to
To pause an infusion using the Stop hard
key
on page
192
.)
To turn the pump Off, press and hold the
ON/OFF
hard key for 5
consecutive seconds.