Use
24
Eisfink Max Maier GmbH & Co. KG
7
Use
This chapter provides information on the use and operation of the appliance.
Keep to the basic rules for operating the product
Before each use, check the appliance for any visible damage.
Only use in dry rooms in the building.
Never operate the appliance unsupervised.
Only operate the appliance with adequate lighting.
For version with
16 A,
acs
®
600 ec, acs
®
1000 ec, acs
®
1100 d3
:
Connect varithek
®
appliances with the same voltage, i.e. 400 V or 230
V.
Equipotential bonding must be carried out by a qualified electrician.
Avoid risks when transporting the mobile appliance
Numerous hazards can arise when transporting this relatively heavy product,
110 to 160 kg
.
Disconnect the connection cable. Only transport the product on straight surfaces using the
required number of people. Always secure the position with the parking brakes. Wear safety shoes
to avoid injuries.
Do not use the appliance as a means of transport. Remove accessories and transport them
separately.
ATTENTION
Note the permissible step height, maximum 4 mm, otherwise the casters might be damaged.
Prevent risks due to electricity
Danger of electric shock. Risk of death
Before each use, inspect the product, the connecting plug and electric cable for any visible signs
of damage. Only connect to a socket with series-connected residual current operated device
(RCD) with a tripping current of 30 mA. Never direct a jet of water at electrical components such
as heater, controller or ventilation grille.
Avoid malfunctions after a power interruption
Disconnect the unit from the mains completely after a power failure. Then switch on the electrical
appliances again.