14
WWW.EILERSEN.COM
Example - Changing minimum weight from -1.000 to -0.090:
A similar screen to the screen shown above appears once change of minimum weight is re-
quested from the
SETUP WEIGHING
screen by moving the cursor using and so the
“Minimum” weight par
ameter is selected and then pressing
.
In order to change the “Minimum” weight parameter to
-0.090 perform these steps:
Press once until
”
-
. 9”
is shown in the display.
T
Press once until
”
-
. 90”
is shown in the display.
Press to accept
”
- 0.090
”
as the new desired value.
–
Check the software version
The software version can be checked during the power-on sequence or in the
SYSTEM
INFO
or
SETUP
screen. When power is applied to the system, the following will happen:
•
The display will show the logo for 5 seconds.
•
The display will show the software version (software name, date and revision).
•
The weighing terminal is ready and enters the
NORMAL
screen.
Select the
SYSTEM
INFO
screen to read the software version (software name, date and revi-
sion):
The
SETUP
screen also shows the software version (software name, date and revision):
