Eikon AETHER RM1, Руководство пользователя

Страница: 14 / 32

14
TROUBLESHOOTING
Issue Indicator Status Solution
No sound or faint sound Receiver LCD off • Make sure AC adapteris securely plugged into electrical outlet
and into DC input connector on rear panel of receiver.
• Make sure AC electrical outlet works and is supplying proper
voltage.
Transmitter power light off • Turn transmitter on
• Make sure the +/ - indicator on battery match the transmitter
terminals.
• Insert a fresh battery.
Receiver display indicates
antenna activity. • Press mute switch on transmitter
• Turnup reveir volume control.
• Increase transmitter ain switch setting.
• Check the cable connection between receiver and mixer.
Receiver: Reception is not
displayed on antenna A or B;
Transmitter and receiver power
ligths glowing. • Extend receiver antennas vertically.
• Move receiver away from metal objects.
• Check for line of sight between transmitter and receiver.
• Move receiver closer to transmitter.
• Check that receiver are using the same frequency.
Transmitter Display indicates
" LO BAT ". • Insert a fresh battery.
Distortion or unwanted
noise bursts Receiver display indicates
antenna activity. • Remove nearby source s of RF interferences (CD players,
computer, digital effects, in-ear monitor).
• Change receiver and transmitter to a different frequency.
• Reduce transmitter Gain.
• Replace transmitter battery.
• Increase the frequency spread between systems.
Distortion suond • Reduce transmitter Gain.
• Replace transmitter battery.