Eiki EK-812U, Руководство пользователя

Страница: 58 / 84

—
42
—
DLP Projector — Owner’s Manual
I
tem
D
escrIptIon
Projector Address Set the projector address. The projector will respond to IR remotes set either
at the same address as the projector or to IR remotes set to address 0.
IR Control Front: ON: Enable the Front IR Sensor
OFF: Disable the Front IR Sensor
Top ON: Enable the Top IR Sensor
OFF: Disable the Top IR Sensor
HDBaseT(*) ON: Enable control signal via HDBaseT device
OFF: Disable control signal via HDBaseT device
Communications menu
Note:
• (*)Change the setting ON / OFF depending on the device, if IR remote control of the projector does
not work.
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (
pq
) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (
pq
) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
OPTION
On
Off
Off
Logo
Aspect Ratio
Auto Source
High Altitude
Test Pattern
Background Color
Hot-Key settings
Power Settings
Light Source Settings
Information
I
tem
D
escrIptIon
Auto Source Select “On” to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
High Altitude Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Test Pattern Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern. Available options: Green Grid, Magenta Grid,
White Grid, White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan.
Select Off to disable the function.
Background Color Use this feature to display a Logo, Blue, Black or White screen when no
signal is available.