Eiki EK-812U, Руководство пользователя

Страница: 57 / 84

—
41
—
DLP Projector — Owner’s Manual
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (
pq
) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (
pq
) to select Communications and
press the Enter button to enter the Communications menu. Press the arrow keys (
pq
) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (
pqtu
) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
Communications
115200
0
LAN
WLAN
Control
Network Reset
Serial Port Baud Rate
Projector Address
IR Control
I
tem
D
escrIptIon
LAN Configure the local area network (LAN) settings.
•
DHCP: Turn the DHCP ON/OFF.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• DNS: Assign DNS.
• MAC Address: Display the network MAC Address value.
• Apply: Apply Network settings.
WLAN Configure the wireless local area network (WLAN) settings.
•
Enable: Enable/Disable WLAN.
• Start IP: Start of IP Address.
• End IP: End of IP Address.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• SSID: Assign Network Service Set Identifier.
•
Apply: Apply Network settings.
Control Configure network control settings.
•
Crestron: Use this function to select the network function (port: 41794).
• PJ Link: Use this function to select the network function (port: 4352).
•
AMX Device Discovery: Use this function to select the network function
(port: 9131).
• Telnet: Use this function to select the network function (port: 3023).
• HTTP: Use this function to select the network function (port: 80).
Network Reset Reset network setting to the factory defaults.
Serial Port Baud Rate Select the serial port its baud rate. Available options: 1200, 2400, 4800,
9600, 14400, 19200, 38400, 57600, and 115200.