—
57
—
DLP Projector — Owner’s Manual
3.
Use the arrow keys (
pq
) to select
Light Source Settings
and press the
Enter
button to enter its
submenu.
Light Source Mode
Constant Power Settings
Total Projector Hours
Lamp Hours
Reset Lamp Hours
PICTURE
OUTPUT
SETUP
OPTION
Light Source Settings
Constant Power
10
4.
Use the arrow keys (
pq
) to select
Reset Lamp Hours
and press the
Enter
button to enter its
submenu.
5.
Use the arrow keys (
pq
) to select
Yes
and press the
Enter
button to reset the lamp used hours
counter to zero.
Reset Lamp Hours
No
Yes
6.
Press the
Exit
button several times to exit the menu.
Replacing the Projection Lens
Perform the following to replace the projection lens:
1.
Center the lens. Use the
Lens H
or
Lens V
button (on the remote control) to adjust the lens at its center
position.
Important:
•
Ensure that the lens is at or near its center position.
•
Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
