—
36
—
DLP Projector — Owner’s Manual
PIP/PBP Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
OUTPUT
and press
the
Enter
button to enter the
OUTPUT
menu. Press the arrow keys (
pq
) to select
PIP/PBP
and press
the
Enter
button to enter the
PIP/PBP
menu. Press the arrow keys (
pq
) to select the menu option
and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button
to confirm.
PIP/PBP Enable
Main Source
Sub Source
Swap
Size
Layout
PICTURE
OUTPUT
SETUP
OPTION
PIP/PBP
On
VGA
DVI-D
Large
PBP, Main Left
I
tem
D
escrIptIon
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
Main Source
From the list of active inputs, select one to be used as the main image.
Sub Source
From the list of active inputs, select one to be used as the PIP/PBP.
Swap
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Size
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Layout
Set the location of the PIP/PBP image on the screen.
PIP/PBP layout and size table as described below.
¾
P : indicates primary source region (lighter color).
¾
* : Both source regions are the same size.
pIp/pbp L
ayoUt
pIp/pbp s
IZe
s
maLL
m
eDIUm
L
arge
PBP, Main Left
P
P
P
PBP, Main Top
P
P
P
PBP, Main Right
P
P
P
