27
Password Setting
([5]Password)
Carrying out security protection using password.
1
1
1
1
1
Enter “5” and press the “Enter” key.
2
2
2
2
2
Enter password and press the “Enter” key.
Display set password (*).
Note
•
Password can be up to 8 characters.
•
You can input the characters below :
a-z, A-Z, 0-9, -, _
•
In the default state, the password is not set.
RS-232C Baud Rate Set-
ting
([6]RS-232C Baud Rate)
Setting of baud rate for RS-232C terminals.
1
1
1
1
1
Enter “6” and press the “Enter” key.
2
2
2
2
2
Select and enter the number 0 or 2 and press
the “Enter” key.
Display set baud rate (*).
Note
•
Set the monitor’s baud rate to the same rate as
that used by the computer.
setup>5
Password
:
Please Enter
: efd52
(change) —> efd52
1
2
*
Monitor Name Setting
([7]Monitor Name)
It is possible to assign a monitor name.
1
1
1
1
1
Enter “7” and press the “Enter” key.
2
2
2
2
2
Enter monitor name.
Display set monitor name (*).
Note
•
Monitor name can be up to 12 characters.
•
You can input the characters below :
A-Z, 0-9, -, _, (,), space
(When “a-z” are input, they are converted to “A-Z”
automatically.)
•
It is the same as the name which can be con-
firmed or set, using RS-232C commands “MTN0”,
“MTN1”, “MTN2” and “MTN3”.
DHCP Client Setting
([8]DHCP Client)
Setting DHCP Client to “Enable” or “Disable”.
Example: When setting DHCP Client to “Enable”
1
1
1
1
1
Enter “8” and press the “Enter” key.
2
2
2
2
2
Enter “1” and press the “Enter” key.
Display the obtained values (*).
setup>6
0 ...
9600 bps
2 ... 115200 bps
Baud Rate Select[0, 2] :2
RS-232C Baud Rate : 115200 bps
1
2
*
setup>7
Monitor Name
: XXX-XX
Please Enter
: MY XXX-XX
(change) —>
MY XXX-XX
1
2
*
setup>8
note: It sets DHCP Client.
0 ... Disable
1 ... Enable
DHCP Select[0-1] : 1
DHCP Client : Enable
Success get data from DHCP server.
[MAC Address ] : [XX:XX:XX:XX:XX:XX]
[IP Address ] : [192.168.150.2]
[Subnet Mask ] : [255.255.255.0]
[Default Gateway ] : [0.0.0.0]
[DHCP IP Address] : [192.168.150.1]
1
2
*
Setting up the Monitor Using RS-232C or Telnet
