EIJKELKAMP AM-100 Aquameter Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 64

EIJKELKAMP AM-100 Aquameter Скачать руководство пользователя страница 56

Aquameter

™

Series Instruction Manual

10401-00188 Rev M

19. Limited Warranty

All   Aquaread   Meters   are   guaranteed   for   three   years,   Probes,   Flow-Through   Cells   and
individual electrodes are guaranteed for one year from date of purchase against defects in
workmanship   and   materials   when   used   for   their   intended   purpose   and   maintained
according to instructions. You must return your warranty card within 30 days of purchase to
activate your warranty.

This warranty is limited to repair or replacement free of charge. Accidental damage,
misuse, tampering, lack of prescribed maintenance, water ingress through unprotected
Meter and Probe sockets, and damage caused by leaking batteries are not covered.

If service is required, contact our Service Department directly by email in the first instance
(

[email protected]

). Report the model number, date of purchase, serial number and

problem. You will be given a Returns Authorisation number by our Service Department.
You should then return the equipment,

thoroughly cleaned

, properly packaged, carriage

paid, to the address you are given. If the equipment is within warranty, any necessary
repairs will be carried out and your equipment will be returned free of charge.

© 2011 Aquaread Ltd.

www.aquaread.co.uk

Page 56 of 64

«
...
54
55
56
57
58
...
»

Содержание AM-100 Aquameter

































































Отзывы:

Нет отзывов