Eighteeth Fast-Pack pro, Руководство пользователя, Страница: 10 / 31

4 Installing the Fast-Pack pro
10 / 31
4. Installing the Fast-Pack pro
4.1 Installation of
heating needle
Make sure the hexagon plum
blossom groove on heating needle
is aligned with the hexagon plum
blossom boss on handpiece, push
till to position.
Holding the grey shell to pull the
heating needle out from the
handpiece.
The heating needle can be installed
in any one of 6 orientations. Pull it
out from handpiece then can be
installed in other orientations.
WARNING
After the operation is completed, wait
for the heating needle to cool down and
remove it to prevent the heating needle
from being damaged accidentally. The
cooling process will take about 2-3
seconds and the real-time temperature
will show on the screen.
Even if the heating needle cools down
already, we strongly recommend not to
touch the metal part on heating needle,
there is a risk of heat injury or damaging
the heating needle. Hold the grey shell
to remove.
4.2 Installation of
adapter
Plug the head into the base if they
are separated in the package.