Eibach Springs LB81-82-007-01-02, Инструкция по установке

Страница: 1 / 3

D3758Rev1
www.eibach.com
Page 1
Kit Contents Description Part Number Qty
Lift Block LB81-82-007-01-RA 2
U-Bolts
, 9/16”-18
H20077482 4
Hex Nuts
, 9/16”-18
H66027400 8
Washer H48027400 8
Instructions LB81-82-007-01-02INST 1
NOTES: Read All Instructions Before Beginning Installation

Only qualified mechanics experienced in the installation and removal of suspension components should
perform this installation.

Use of a hoist and screw jack is highly recommended and will substantially reduce installation time.

Never work on or under a vehicle unless it is properly supported.
Eibach Pro Lift Block Installation
1. Begin by raising the vehicle and supporting it with the
proper safety equipment. Note: Never work on or
under a vehicle that is not supported by the proper
safety equipment.
2. Use a screw or pole jack to support the rear axle, then,
loosen and remove the four hex nuts that secure the OE
U-bolts and axle bracket.
(See Photos 1 & 2)
3. You can now remove the axle bracket and U-Bolts as
shown. (See Photos 3 & 4)
Installation Instructions
PRO LIFT BLOCK
#LB81-82-007-01-02
Eibach Springs, Inc.

264 Mariah Circle

Corona, California 92879-1751

USA

Tech Support 800-222-8811 Ext 114
Photo
1
Photo
2
Photo
3
Photo
4