D3824
Page 1
Kit Contents
Description
Part Number
Qty
End Link
UEL10010113
2
Instructions
AK41-213-001-01-20INST
1
NOTES:
Read All Instructions Before Beginning Installation
Only qualified mechanics experienced in the installation and removal of suspension components should
perform this installation.
Use
of a hoist and screw jack is highly recommended and will substantially reduce installation time.
Never work on or under a vehicle unless it is properly supported.
Removal and Installation of Eibach
adjustable end links.
1. Loosen and remove the hardware that secures the OE
end link to the end of the OE anti roll bar and the control
arm, then, remove the end link.
(See Photos 1 & 2)
2. Adjust the Eibach end link to
160mm
from center to
center as shown. Do not tighten the jam nuts at this
time.
(See Photo 3)
Installation Instructions
Front End Link Kit
# AK41-213-001-01-20
Eibach Springs, Inc.
264 Mariah Circle
Corona, California 92879-1751
USA
Tech Support 800-222-8811 Ext 114
Photo
1
Photo
2
Photo
3
Photo
4
160mm
