O2- Kompmaster
Page 3
All rights reserved. May not be photocopied or stored on a retrieval system without the prior written permission of EHS.
Only for use in conjunction with an Aerotronic control unit. © EHS- Engineering 2003
For more information, see
http://www.komposttechnik.de
3.1 Supply Pin Configuration
Figure 2: Supply Pin Configuration
Pin 1 +24V (controlled DC)
Pin 2 Power supply ground
Important:
The protective earth must be connected via the cable shield to the control unit.
3.2 Control Output Pin Configuration
Figure 3: Control Output Pin Configuration
Pin 1 K1
Pin 2 K2
In switched state K1 and K2 are electrically connected.
