O2- Kompmaster
Page 12
All rights reserved. May not be photocopied or stored on a retrieval system without the prior written permission of EHS.
Only for use in conjunction with an Aerotronic control unit. © EHS - Engineering 2003
For more information, see
http://www.komposttechnik.de
9 Notes
The device is designed exclusively for low voltage. Non-observance of this
specification makes any warranty claim null and void.
Only connect low voltage to the control output.
Only connect measuring sensors authorized by EHS or UTV to the control unit.
Only use the interfaces and cables provided by EHS/UTV to connect the control
unit to the computer.
Only use replacement fuses which comply with the specification. Fuses with other
values can cause damage to the control unit.
Eliminate all faults immediately and carefully.
Before opening the housing, unplug the power supply to prevent short-circuits
inside the control unit!!!
To not use pointed or sharp objects when working on or around the opened
electronics.
Make sure that no water penetrates the housing.
Proceed with great care when setting the composting control unit! The result of the
composting process directly depends on it.
Regularly save the logged composting data on the PC.
Back up your data regularly.
Observe the notes and technical specifications in the manual.
Important:
The protecting ground must be connected via the cable shield to the control unit.
10 Power supply
To supply the control unit a power supply unit with max. power of 100W has to be
used!
