EHP USB-Box, Техническое руководство

Страница: 12 / 23

A radio frequency is preset between the EHP crane scale and the USB-Box. This corresponds by default
to channel 01 (433.075 MHz). The radio frequency can be changed using the "EHP USB-Box Setup Tool"
software. The tool is available on the driver & firmware CD or as download on ehp.de.
The following table shows the radio frequency of the respective channel numbers. When selecting
the radio channel, make sure that it is not already occupied by other radio users (e.g. radio crane
control).
01 433,075 15 434,000
02 433,125 16 434,075
03 433,175 17 434,150
04 433,225 18 434,225
05 433,275 19 434,300
06 433,325 20 434,375
07 433,400 21 434,425
08 433,475 22 434,475
09 433,550 23 434,525
10 433,625 24 434,575
11 433,700 25 434,625
12 433,775 26 434,675
13 433,850 27 434,725
14 433,925 28 434,775
Table 2 – Channel number & Frequency