SAFETY INSTRUCTIONS
SPECIFIC SAFETY RULES CAN BE FOUND IN THE APPLICATION MODELS OF
BLOWER'S MANUAL
APPLICATION
Blows leaves,pine needles and other debris from your rain gutters with a powerful blast of air from your
EGO Power Blower.
DESCRIPTION
KNOW YOUR GUTTER CLEANING ATTACHMENT KIT(Fig.1)
1
Nozzle connector
Connector
Extension tube
Nozzle
ASSEMBLY
1. Tighten each part over the protrusions at the end of the threads. Assemble only enough extension
tubes to allow you to comfortably reach the inside of the rain gutter(Fig.2).
2. Align the groove in the gutter cleaning
attachment kit and push the tube onto the
blower housing until you hear a “click”
(Fig.3&4).
3. To remove the gutter cleaning attachment kit,
press the tube-release button and pull the
tube away from the blower (Fig.5).
4. Connect the blower after installation. If the
direction is not ideal, the nozzle and nozzle
connector can be separated and re-installed
according to the needs of the job (Fig.6).
OPERATION
1. Each nozzle has 15 protrusions, each of
which can rotate 360 degrees (Fig.7).
2. Start the unit and slide the nozzle along the
lip of the gutter, lifting the outlet nozzle up
and over the gutter support brackets. Keep
the long tubes angled slightly ahead of you in
the direction you are cleaning (Fig.8).
NOTICE:
The attachment sways slightly when the blower is
turned on.
Gutter cleaning applications will vary when
using this attachment. Some practice and
experimentation will be necessary to find the most
effective position for the type of house and gutter
design.
Use only enough Tube Extensions to comfortably
reach the inside of the rain gutter.
Debris may fall during use. Take care to avoid
falling debris and wear protective clothing.
OPERATOR’S MANUAL
GUTTER CLEANING ATTACHMENT KIT
MODEL NUMBER AGC1000
Compatible with EGO blower models: LB5300, LB5750, LB5800, LB6500,
LB5300-FC, LB5750-FC, LB5800-FC, LB6500-FC.
1
2
3
4
1
2
5
1
3
2
6
7
8
2
3
CONSIGNES DE SÉCURITÉ
POUR CONNAÎTRE LES CONSIGNES DE SÉCURITÉ SPÉCIFIQUES À VOTRE PRODUIT,
VOUS POUVEZ CONSULTER LE MANUEL CORRESPONDANT À VOTRE MODÈLE DE
SOUFFLEUSE.
APPLICATION
L’EGO Power Blower déloge les feuilles, aiguilles de pin et autres débris coincés dans vos gouttières grâce
à son puissant jet d’air.
DESCRIPTION
FAMILIARISEZ-VOUS AVEC VOTRE KIT D’ATTACHEMENT DE NETTOYAGE DES GOUTTIÈRES (Fig. 1)
1
Connecteur de buse
Connecteur
Tube de rallonge
Buse
ASSEMBLAGE
1. Serrez chaque partie au-dessus des protubérances à l’extrémité des filets. Assemblez seulement
une longueur suffisante des tubes de rallonge pour vous permettre d’atteindre facilement l’intérieur
de la gouttière (Fig. 2).
GUIDE D’UTILISATION
KIT D’ATTACHEMENT DE NETTOYAGE DES
GOUTTIÈRES
NUMÉRO DE MODÈLE AGC1000
Convient au modèle de soufflante EGO: LB5300, LB5750, LB5800, LB6500,
LB5300-FC, LB5750-FC, LB5800-FC, LB6500-FC.
2
