1.
In the configuration interface, open the page
System /
Network.
2.
Next to Discovery, deactivate the check box
Enable
.
3.
Click on
Save
to apply your changes.
4.1.6 Reset internal memory
Once Querx TH is powered up, the device starts recording
data. To restart the recording with the new settings, you
need to reset the internal memory.
1.
In the configuration interface, open the page
Maintenance
/ Reset
.
2.
Click on the
Delete sensor data
button
.
3.
Confirm the reset by ticking the check box
Are you sure
.
4.
Click on
Yes
.
This process can take several seconds. Afterward Querx TH
restarts recording data with timestamps and temperature
units according to your configuration.
4.2 Network configuration
In most cases, Querx TH automatically gets a network
configuration over DHCP. It is nevertheless possible to
manually configure network settings.
⚠
Information
Some changes to the network configuration require a
reboot of the system. See Section 6.1, 'Restart Querx TH'.
Configuration
13
