4.1.3 Configure a name server
You need to provide a name server to enable services like
NTP, email and cloud connectivity.
1.
In the configuration interface, click on
System / Network
.
a.
If a name server is provided via DHCP, check
Obtain
DNS server automatically.
b.
To manually set a name server, select
Set DNS server
manually
and enter the IP address at
Preferred DNS
server.
2.
Click on
Save
to apply your changes.
3.
If you have changed DNS settings, restart the unit over
web interface, as discussed in chapter 6.1.
4.1.4 Set date and time
There are three ways to set date and time:
If there is an NTP server available in your local network or if
Querx TH has an internet connection, you should obtain
date and time automatically via SNTP.
Otherwise, you can synchronize the time with the computer
from which you are configuring Querx TH or set it manually.
1.
Open the page
System / Time
in the configuration
interface
.
2.
Select the appropriate time zone for your country from
Set time zone
.
3.
Set daylight saving time options:
a.
If in your country daylight saving time is applied and
time changeover happens at the last Sundays in March
and October, check
Auto DST
.
b.
If DST is applied in your country, but time changeover
does not happen at the last Sundays in March and
October, do not set
Auto DST
. Instead, set
DST
manually
when DST is in effect.
Configuration
11
