20
SYMBOL DEFINITION FOR SAFETY EQUIPMENT AND ACCIDENT PREVENTION
Read operating instruction booklet/ safety instructions!
Before working on or with the tool, read the safety instructions and follow the instructions during
operation.
Use eye protection or wear safety goggles!
This not only applies to the operator, but also to any other person within the vicinity of the
machine.
Wear hearing protection!
This not only applies to the operator, but also to any other person within the vicinity of the
machine.
Wear protective work shoes!
Wearing open sandals or damaged/ unsuitable footwear can result in injuries.
Only wear proper footwear which is suitable for the requirement of the workplace.
Wear protective gloves!
Defective/ improper gloves may lead to injury. Only wear proper hand protection appropriate for
the requirements of your application.
WARRANTY AND LIABILITY
Unless otherwise specified, our „General Sales Terms” apply.
Warranty and liability claims in regards to persons or equipment damages are invalid, if one or several of the
following causes apply:
• Use of the equipment in a non-designated application.
• Improper assembly, start- up, operation or maintenance of the machine.
• Operation of the machine with defect safety devices or improperly fixed or non-functioning safety and protection
devices.
• Non-observance of the instructions in the operating instruction booklet concerning transport, storage, assembly,
startup, operation, maintenance and setting up of the machine.
• Independent structural alterations or settings on the machine beyond the intended purpose.
• Inadequate supervision of wear parts.
• Improperly carried out repairs, inspections or maintenance.
• Catastrophic cases because of a war, acts of god or other reasons which are beyond our control.
OWNER OBLIGATIONS
Generally, the machine operator is responsible for correct conditions/ operation of the machine and adherence
to the safety regulations. The machine is built according to the level of technology and recognized technical safety
regulations. However there is still a risk of accidents to the operator or third parties or damage to the machine or
other objects.
All current regulations and specifications which apply to the site of operation in regards to accident prevention,
installation of electrical and mechanical systems as well as radio interference must be observed.
IMPORTANT -
The operator must make sure that...
• risk assessment is carried out for the specific risks, which can occur due to any operation of the machine.