eFUEL SK-200015 Скачать руководство пользователя страница 1

In case of an error the screen will display the error code as below:

WARNING  AND  ERROR MESSAGE

INTRODUCTION

Thank you for purchasing the eFUEL 1200W, 50A AC/DC Switching Power Supply V2. We are confident 
that  you  will  be  very  pleased  with  its  performance  because  our  AC/DC  Switching  Power  Supply  is 
designed and manufactured by skilled professionals using the highest standard in workmanship. You can 
be assured of many years of trouble-free service.

Your  eFUEL AC/DC  switching  Power  Supply  is  designed  to  use  household AC  power  sources  to  power 
devices that demand DC power. The eFUEL converts standard mains power of AC 100-240V to DC 15-
30V power and can supply up to 50 amperes of continuous power.

Dual  DC  output  ports  are  converted  from  banana  connectors  to  XT90  battery  connectors.  It  gets  more 
convenient & safe to charge the most popular battery with the XT90 connector and avoid the possibilities 
of reverse polarity.

INSTRUCTION MANUAL

1200W,

50A AC/DC SWITCHING

POWER SUPPLY   V2

SK-200015

1

2

AC Power 
Input

Power
Switch 

AC

 

INPUT

100-240V

OFF

ON

Temp. Controlled Fan

CAUTION: 

Check the AC Voltage
Before POWER ON

Cooling
Fan

Two main DC outputs(up to 50 amperes), three output(up to 10 amperes each) with ON/OFF switch.

Output voltage adjustable: 15-30V.

LCD indicates output voltage and current.

AC 100-240V worldwide operation: need not any alternative switcher, worldwide safe operation.

Two USB ports: 5V/2.1A total for iPad, smart phone, digital cameras and etc.

Smart cooling fans: automatic temperature control.

Over-current, over-voltage, over-load and over-temperature protection.

FEATURES

Over temperature protection.

Over current protection.

Over power protection.

The power supply's overload protection circuit automatically shuts down the power supply when overloaded. To reset the 

power supply, please TURN OFF the power supply, reduce the load after warning signs disappear, then TURN ON.

If OCP or OPP shows on the LCD screen, switch off the power, reduce the load after warning signs disappear, then turn 

on again.

Helpful Tip:

When  this  unit  is  working  with  Revolectrix  Cellpro  Power  Lab  8,  to  maximize  its  efficiency  without  damaging  eFuel 

1200W and Power Lab 8, please set the Power Source of Power Lab 8 as following:

5V/2.1A
USB Port

Cooling
Fan

Current & Voltage 
Readout 

Voltage Adjustment Dial
(15V-30V)

Dual DC Output 
(Max. 50A)

Three deputy outlet
(Max. 10A)

OPERATION

Please check all connections and confirm the wall AC outlet has power before switching on the power supply.

The  LCD  will  display  the  actual  output  voltage  and  current.  If  the  voltage  is  NOT  suitable  for  your  charger  or  other 
devices, use the rotary dial to adjust the output voltage.

Output Power

Chart

Output Voltage(V) Max Current(A)

Max Power(W)

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

1150

1200

1200

1200

1200

1200

1200

1200

50.0

50.0 

48.0 

46.2 

44.4 

42.9 

41.4 

40.0 

Output Voltage(V) Max Current(A)

Max Power(W)

50.0 

50.0

50.0

50.0

50.0

50.0

50.0

50.0

750

800

850

900

950

1000

1050

1100

To take full advantage of eFUEL 1200W’s capability, the output voltage should be 24V DC or higher. Per Ohm’s law, 
24V x 50A = 1200W. Therefore, if you want to attain 1200W of output power, the output voltage must be set to 24V or 
higher.

The actual amount of output current is also limited to 1200 Watts. If the output voltage is 30V, the max current is 40A.

Warning: Don’t adjust the output voltage when the power supply is working. 
Or damage may occur to the charger.

Warning:

Output
Voltage

Output
Current

Output voltage
adjustable 15

-

30V

Press and hold the rotary dial for 3 seconds, and the output voltage value will start to blink, then turn the dial clockwise 
or counter-clockwise to change the value, press the dial rotary once to confirm the desired value.

If you don’t press the rotary to confirm for 5 seconds during the process, the power supply will take the present 
value as your selected automatically.

NOTE: 

How to Adjust the Output Voltage?

1. Ensure the power switch is OFF
2. Connect the load to the POWER SUPPLY
3. Plug the Power Supply into an AC outlet
4. Turn the power switch ON

  P o w e r S o u r c e

> D C P o w e r S o u r c e

S u p p l y C u r r e n t
L i m i t ? > 4 0 . 0 A

L o w S p l y L i m i t ?
> 2 4 . 0 V

Отзывы: