Mechanical Operation and Maintenance Manual for ER20-1100 Industrial Robot
11
removing the cable
connector.
NO stepping
on
Stepping on the robot
during maintenance is
forbidden to avoid personal
injuries and damage of
components which will
affect the performance of
the robot.
It is generally pasted on the
motor.
1.3 Transfer and Sale of Robot
If the ownership of the robot is transferred or sold to a new user, attached documents,
including mechanical operation manual, electrical maintenance manual, and
programming manual, must be transferred.
If the robot is transferred to sold to a foreign country, the new user must modify the
languages in the above attached documents to comply with local laws and regulations.
Wrong or unsafe operation due to insufficient understanding of the manuals can lead to
accidents.
When the robot is transferred or sold to a foreign country, safety relevant terms in initial
contract which does not include specific provisions shall not be borne by the new
recipient.
The original user and the new recipient must sign a new contract.
1.4 Abandonment of Robot
The disassembly, heating, or incineration of batteries in control devices and robot body
could cause fire, rupture, and other accidents.
Please do not disassemble the board and components of control devices before
discarding them.
Sharp parts, such as cracks or cuts, and wires may cause injuries.
After the wires and external wiring are removed from the connector and junction box, do
not future disassemble them and discard them. Otherwise, injuries on hands or eyes
caused by conductors may occur.
