EFORT EC2-S, Руководство по эксплуатации и обслуживанию

Страница: 44 / 121

EFORT INTELLIGENT EQUIPMENT CO.,LTD
34
3. Install the
controller and IO
module on the bus
coupler and bus
base module
respectively
3
、
Controller Remote IO Expansion
The remote IO expansion of the controller adopts the standard EtherCAT bus communication protocol.
The RJ45 interface can be directly connected with a network cable (optional according to needs), and is not
limited by the internal space of the control cabinet.
Table 3-10 Connection Mode of Remote IO Module
controller Ethernet switch
remote IO module EtherCAT
coupler
3.2.3 Motion Control Card
1
、
Precautions for the Use of Motion Control Card:
(1) The motion control card is used to save the program data and firmware of related applications. The
controller must insert the corresponding motion control card to run the corresponding application. In some
applications, the motion control card can also be used to store machine data.
(2) Be sure to use the motion control card recommended by EFORT. Other motion control cards not
recommended by EFORT cannot guarantee the normal operation of the controller functions.
(3) Please do not use brute force when inserting the card. The memory card slot has an error-proof
design, and the card can only be inserted into the card slot from one direction. The card can be inserted with
only a small amount of force. Improper insertion may damage the pins of the motion control card slot.
(4) The motion control card should be moisture-proof, heat-insulated, avoid direct sunlight, anti-static,
and cannot be dropped or bent.
(5) When the controller writes to the memory card, it cannot be powered off and the card cannot be
removed.
(6) It is forbidden to format the motion control card.
Et
Et