Efkon EFAS, Руководство пользователя

Страница: 11 / 135

Introduction
11
EFAS
1.4 General
This section includes the following information:
• Hints to taking care of EFAS
• Handling tachograph cards
• Handling printouts
• Automatic settings
1.4.1 Hints to taking care of EFAS
Use a soft cloth, slightly dampened with water to clean the
front panel, the keys and the display of the digital tacho-
graph EFAS. To avoid scratching the surface, please take
care not to apply too much pressure.
Do not use any abrasive cleaning materials to clean EFAS.
Under no circumstances should you use solvents such as
petrol, acetone, methylated spirits or alcohol.
1.4.2 Handling Tachograph Cards
Tachograph cards are electronic chip cards which are used
for digital tachograph identification and to store certain
data.

There are four types of tachograph cards. The different
types of tachograph cards are identified by different col-
ours.
Driver Card
The driver card (white) is used by the driver to identify him-
self on the digital tachograph. The driver card is for normal
driving. The card stores, displays and prints driver’s activi-
ties.
Company Card
The company card (yellow) is used to display, print and
download the company data stored in the digital tachograph
or on the driver card. The company card is intended for the
owner of the vehicle.
Control Card
The control card (blue) is used by employees of controlling
bodies, e.g. the police, to identify themselves. The control
card is used to display, print and download data stored in
the vehicle unit and on the driver card.
Workshop Card
The workshop cards (red) are for employees of authorised
workshops. The workshop cards can be used to activate,
inspect and calibrate the control device. The workshop
cards can also be used for test drives.
Note
The driver card, control card and workshop card are personalised.
It is not permissible to pass the cards on to other persons.