Trion T120 BGA324 Development Kit User Guide
Attaching Camera Connector Daughter Cards
The camera connector daughter card attaches to the high-speed MIPI TX or RX headers.
Figure 8: Attaching Camera Connector Daughter Cards (T120 BGA324 Board)
To connect a daughter card:
1.
Remove power from the Trion
®
T120 BGA324 Development Board.
2.
Attach standoffs to the daughter card.
3.
Attach the daughter card to the 40-pin header on the board.
4.
Connect the camera module or computer to the daughter card using a ribbon cable.
5.
Power up the board.
Learn more:
Refer to
Running the Loopback Design
for details on how to perform loopback testing.
www.efinixinc.com
31
