manualshive.com logo in svg

Efinix Titanium Ti60 F225, Руководство пользователя

Поделиться
Скачать
Efinix Titanium Ti60 F225 Скачать руководство пользователя страница 38

Titanium Ti60 F225 Development Kit User Guide

Mini-DSI Panel Backlight Setup

Note: 

 You only need to verify the backlight voltage when setting up the Mini-DSI panel for the first time.

The Mini-DSI panel backlight voltage must be within 15.5 V to 17.5 V. The Mini-DSI panel

can be damaged if the backlight voltage is not within the recommended range.

Measuring and Tuning the Backlight Voltage
1.

Connect the Mini-DSI Display the Dual MIPI to DSI Converter Daughter Card using the

attached 48-pin flat cable.

2.

Power up the board.

1.

Attach standoffs to the daughter cards.

2.

Remove power from the Titanium Ti60 F225 Development Board.

3.

Attach the Dual MIPI to DSI Converter Daughter Card to any of multi-purpose header

on the Titanium Ti60 F225 Development Board.

4.

Attach the Mini-DSI Panel Connector Daughter Card to the Dual MIPI to DSI Converter

Daughter Card using a 30-pin flat cable.

Note: 

 Do not connect the Mini-DSI panel.

5.

Turn on the Titanium Ti60 F225 Development Board.

6.

On the Mini-DSI Panel Connector Daughter Card, monitor the voltage on header J4

pin 4 (LEDA).

7.

If the voltage is not within 15.5 V to 17.5 V, adjust the variable resistor on the Mini-DSI

Panel Connector Daughter Card, R14, until the voltage is with the range.

www.efinixinc.com

38

Содержание Titanium Ti60 F225
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды