Efinix T20F256C-DK, Руководство пользователя

Страница: 3 / 16

Trion T20 BGA256 Development Kit User Guide
Introduction
Thank you for choosing the Trion
™
T20 BGA256 Development Kit (part number:
T20F256C-DK), which allows you to explore the features of the T20 FPGA with a MIPI
interface.
Warning: The board can be damaged without proper anti-static handling.
What's in the Box?
The Trion
™
T20 BGA256 Development Kit includes:
• Trion
™
T20 BGA256 Development Board preloaded with a demonstration design
• 4 standoffs
• 4 screws
• 3 foot micro-USB cable (type B)
Software Requirements
To develop your own designs for the T20 device on the board, you must install the Efinity
®
software. You can obtain the software from the Efinix
®
Support Center under Efinity
Software ( www.efinixinc.com/support/ ).
The Efinity
®
software includes tools to program the device on the board. Refer to the
Efinity
®
Software User Guide for information about how to program the device.
Learn more: Efinity ® documentation is installed with the software (see Help > Documentation ) and is also
available in the Support Center under Documentation ( www.efinixinc.com/support/ ).
Installing Standoffs
Before using the board, attach the 4 standoffs to the board with the screws provided in the
kit.
Warning: The board can be damaged if you over tighten the screws. Tighten all screws to a torque between
4 ± 0.5 kgf/cm and 5 ± 0.5 kgf/cm.
www.efinixinc.com 3