Dodge Cummins User Guide
- 10 -
www.efilive.com
V8 Scan and Tune
1. Open the EFILive V8 Scan and Tune software.
2. Connect your FlashScan/AutoCal device to your PC and vehicle.
3. Turn the vehicle ignition to the
On
position.
4. Navigate to the [F4: OBD] -> [F2: OBD] menu option and select the [Details]
tab.
5. Select your controller(s) by using the [Auto Detect] button, or;
a. Hover over the Engine Controller box, and
right click on the “Right-click to
select engine-controller
” box and manually select the ECM.
b. Navigate and select the correct controller.
6. Click the [Read] button to populate controller data.
7. Copy or record th
e Calibration ID to use in the “Match Calibration
Requirements” step later in this document.
FlashScan/AutoCal V3
1. Connect your FlashScan/AutoCal V3 device to your vehicle.
2. Turn the vehicle ignition to the
On
position.
Option 1: Display VIN/Info
3. Navigate to the Diagnostics -> F1 Display Info -> F1: Display VIN Info menu
option.
4. Select correct controller type from list of controllers.
Содержание Dodge Cummins
Страница 1: ...Cindy Myers Dodge Cummins User Guide...