Introduction
This document describes tasks that must be completed or coordinated by the administrator of the Kyocera® Printing
System 17 Powered by Fiery®.
The procedures in this document require the following conditions:
•
The PS-17 is installed at the site and confirmed as operational by the service technician.
•
The PS-17 is connected to the network, a power source, and the printer.
•
The printer is powered and operational.
Note:
For information about how to configure the printer, see the documentation accompanying the printer.
Terminology, conventions, and documentation resources
This document uses the following terminology and conventions to refer to the Kyocera® Printing System 17 Powered
by Fiery®, printer, and supported operating systems.
Term or convention
Refers to
Aero
PS-17 (in illustrations and examples)
Command WorkStation
Fiery Command WorkStation
Printer
TASKalfa 7054ci/6054ci/5054ci/4054ci
PS-17
Kyocera® Printing System 17 Powered by Fiery®
macOS
All supported Mac operating systems. For a complete list, see System Requirements in
Configuration and Setup
.
Windows
All supported Windows operating systems. For a complete list, see System Requirements in
Configuration and Setup
.
DANGER
A danger concerning operations that may lead to death or injury to persons if not performed
correctly. To use the equipment safely, always pay attention to these warnings.
WARNING
A warning concerning operations that may lead to injury to persons if not performed correctly. To
use the equipment safely, always pay attention to these cautions.
CAUTION
Operational requirements and restrictions. Be sure to read these items carefully to operate the
equipment correctly, and to avoid damage to the equipment or property.
Configuration and Setup
Introduction
7
