![EFI FIERY X3eTY 35C-KM Скачать руководство пользователя страница 80](http://html1.mh-extra.com/html/efi/fiery-x3ety-35c-km/fiery-x3ety-35c-km_service-manual_2367289080.webp)
72
The troubleshooting process
Clearing the CMOS and power-up settings
Use the following procedure to clear the CMOS and power-up settings for the
Fiery X3eTY, as a final troubleshooting step before you decide to replace the
motherboard.
T
O
CLEAR
THE
CMOS
AND
POWER
-
UP
SETTINGS
1.
Make sure the Fiery X3eTY is powered off, and remove the power cable from the system.
2.
Access and open the Fiery X3eTY (see page 9).
3.
Remove the battery from the motherboard (see page 22).
Set aside the battery so that you can replace it later.
4.
Locate the jumper that is installed on JP3 on the motherboard, near the battery socket.
Remove the jumper from pins 1 and 2, and install it on pins 2 and 3.
F
IGURE
26-4
JP3 on the motherboard
5.
Wait one full minute.
6.
Remove the jumper from pins 2 and 3 on JP3, and install it back on pins 1 and 2.
7.
Reinstall the battery.
8.
Reassemble the Fiery X3eTY (see page 34).
9.
Power on the Fiery X3eTY and configure the date and time in Setup.
For more information about Setup, see
Configuration and Setup
on the
User Documentation CD.
1
2
3
Battery socket
JP3