10
Implementing third-party media profiles
You can use any third-party CMYK/OG media profile in Fiery XF by connecting it to an
existing base linearization file.
T
O
IMPLEMENT
A
THIRD
-
PARTY
MEDIA
PROFILE
IN
F
IERY
XF
1 In the toolbar, click Color Tools.
You must set up a valid linearization device before you can start Color Tools. For more
information on setting up the linearization device, see the Fiery XF online help.
2 Click Profile Connector.
3 Under “Printer linearization”, click Select and browse to the EFI Media Profiles folder.
4 Open the folder for your printer, and open the subfolder for the media type and resolution
that most closely matches the properties of the third-party media profile.
5 Under “Media type”, type the name of the media.
This is the name that will appear in Fiery XF.
6 Under “Connect to profiles”, select “Media profile”. Then click Select, browse to the third-
party media profile, and click Open.
7 Click OK.
You can now select the profile in Fiery XF.
T
O
SELECT
A
THIRD
-
PARTY
MEDIA
PROFILE
IN
F
IERY
XF
When the profile has been connected to a base linearization file, you can select it for the
workflow.
1 In System Manager, click the EFI output device.
2 On the Media tab, open the Print Configuration pane.
3 Under “Calibration set”, select the base linearization file that you selected in Profile
Connector.
Installing the Fiery XF client on a remote computer
You can install the Fiery XF client on a remote computer and log on to the Fiery XF server
that is installed on the Fiery proServer. The following operating systems are supported:
• Windows 7 (32 bit and 64 bit)
• Windows 8 (32 bit and 64 bit)
• Windows 8.1 (32 bit and 64 bit)
• Windows 10 (32 bit and 64 bit)
• Windows 2012 Servers
• Windows Server 2016
