EFI Fiery EXP5000 Color Server, Руководство пользователя, Страница: 18 / 28

P
RINT
O
PTIONS
18
Schedule Printing
On/Off Specify if you want to perform advance
print scheduling based on date and time.
If enabled, select the date and time for
the job. The job is printed based on the date and
time set on the Fiery EXP6000/EXP5000,
not the client workstation.
If multiple jobs are selected and defined with
the same date and time setting, job order is
based on alphabetic order of the file names.
Spot Color Matching
Printer’s default/Off/On Select Off to print specified PANTONE
colors in your job using the current
CMYK Simulation and CMYK Simulation
Method.
Select On to activate the PANTONE
Lookup Table. The Fiery EXP6000/
EXP5000 prints specified PANTONE colors
in your job by matching the CMYK print
blend to the same color from the
PANTONE library.
The Printer’s default setting reflects the
setting specified in Fiery EXP6000/
EXP5000 Setup.
This print option is available as part of
FGAP. For more information, see
Fiery Graphic Arts Package .
For Windows, choose Expert Color as the
Color Mode to access this option.
For more information, see Color Printing .
Stapler Mode
Printer’s default/Off/Front/Rear/Dual Indicate whether or not to staple a job and,
if so, where you want it stapled.
Substitute Colors
Off/On Enable to use the Substitute Color Values
defined in the EFI Spot-On module of
ColorWise Pro Tools. This option is available as part of FGAP.
For more information, see Fiery Graphic Arts
Package .
Text/Graphics Enhancement
On/Off Specify if you want to sharpen the edges of
text or vector graphics.
Tray Alignment
Printer’s default/Enable/Disable Specify if you want to enable tray alignment. Printer’s default reflects the setting specified
in Fiery EXP6000/EXP5000 Setup.
For more information, see Utilities .
Units
inches/mm/points Specify the measurement values when using
the Image Shift print option For more information about Image Shift, see
page 23 .
Use Master
None/1-15 For variable data print jobs, specify the
FreeForm master to use for the job. For more information, see Variable Data
Printing .
Command Workstation allows you to select
up to 100 FreeForm Masters.
For more information about creating
FreeForm masters in Command
Workstation, see Command WorkStation
Help.
Option and settings
(default setting is underlined)
Description Requirements, constraints,
and information