EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 144 / 243

Separate RGB/Lab to CMYK source
Select the
Separate RGB/Lab to CMYK source
option for RGB jobs to simulate an output printer other than the
printer to which you are printing.
For more information, see
Color Printing .
Substitute colors
The
Substitute colors
print option, when selected, uses the substitute color values defined in Spot-On.
For more information, see Color Printing .
Image options
The
Image
tab shows all image quality settings supported by the connected Fiery ES and printer.
For information about options specified in Setup, see Configuration and Setup .
Brightness
The
Brightness
print option allows you to specify the image brightness for the print job.
Select
85% lightest
for a substantially lighter image,
115% darkest
for a substantially darker image, or one of the
settings in between.
Edge enhancement
When the
Edge enhancement
print option is set to
On
, it smooths the edges of text and graphics and reduces the
appearance of jagged edges.
Gloss print
Select the
Gloss print
check box to gloss the print job like a photograph.
This feature is available when the
Paper type
option is set to
Plain paper
and the
Duplex
option is set to
Off
.
Image enhance: Apply image enhancement
The
Apply image enhancement
option, when selected, applies photo enhancement to the job.
The supported file formats are PDF, PS, TIFF, and EPS.
This option is not valid for images under 72 dpi. Also, it is not applied to pages with a large number of images.
For more information, see
Image Enhance on page 102.
Image enhance: Image enhancement range
Specify all pages, specific page(s), or sheets of the document to apply photo finishing enhancement.
Printing
Print Options
84