EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 132 / 243

Note: This option is invalid if your job is sent to the Direct connection.
N-up option: Print border
Select to turn on
Print border
to print borders around each page in your print job.
Rotate 180
The
Rotate 180
print option, when selected, rotates the pages of a job 180 degrees.
Scale to fit
The
Scale to fit
option allows you to specify whether to scale your job to fit to a paper size. When using the
Scale
to fit
option, you cannot use the manual
Scale
option.
The
Scale to fit
option allows you to scale a job to a paper size different from the document size. When you turn
on this option, the image is increased or reduced in size to fit the imageable area of the paper size you select
from the
Paper size
menu. The document size is scaled to the printable imageable area of the paper for edge-to-
edge printing. When you turn off this option, the original document size is printed without any scaling, even if
you select a larger paper size.
Scale to fit option Document size - Letter Output paper size - 11x17
Scale to fit
turned on
Scale to fit
turned off
Scale
Specify an increase or decrease in the scale of your print job. When using the manual
Scale
option, you cannot
specify
Scale to fit
.
The operator can specify a scaling override in Command WorkStation, but the override is applied to any scaling
value already set in the active job. For example, if a user sends a job with a scaling value of 50% and the operator
specifies a
Scale
override of 300%, the job is printed at 150% of the original document size, that is, 50% of 300%.
Printing
Print Options
72