EFI Fiery ES IC-418 Скачать руководство пользователя страница 10

Страница: 10 / 243

Note:

Support for Mac OS versions requires Intel-based Mac computers.

•

Mac OS X v10.9

•

Mac OS X v10.10

•

Mac OS X v10.11

•

Mac OS X v10.12

System requirements for Mac client computers

The following table lists the system specifications required to install and use Fiery ES utility applications and printer

drivers on Mac client computers.

System requirement

Description

Processor

Intel processor that supports the version of Mac installed. For

more information, go to

apple.com

Memory (except for Command WorkStation)

500MB (1GB recommended)

Hard disk space (except for Command WorkStation)

500MB (1GB recommended)

System requirements for Command WorkStation and WebTools

The following specifications are required to install and use Command WorkStation or WebTools on a client

computer.

Note:

The Fiery ES supports Command WorkStation and WebTools by default (no configuration is required).

Requirement

Descriptions

Internet browser versions supported for using WebTools and

for viewing Configure within Command WorkStation

•

Windows: Internet Explorer 11 or later, Firefox 31.0 or

later, Chrome 37.0 or later
In addition, Microsoft Edge is supported for client

computers that are running Windows 10 (not supported

for other versions of Windows)

•

Mac OS: Safari 7 or later, Firefox 31.0 or later, Chrome

37.0 or later

Note:

Microsoft releases frequent updates to Internet

Explorer. Because support cannot be guaranteed for all

versions, use the specified version for best results. On Mac

OS, some versions of Firefox may not allow you to enter

passwords into Configure. If this occurs, use Safari instead.

Memory (required for Command WorkStation only)

1GB or more

Hard disk space (required for Command WorkStation only)

3GB

Configuration and Setup

System requirements

Содержание Fiery ES IC-418




















































































































































































































































Результаты поиска

Содержание Fiery ES IC-418

Отзывы:

EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 10 / 243

Результаты поиска

Содержание Fiery ES IC-418

Отзывы: