15
Installation and Service Guide: Printer Controller EB-34
Installing Hardware
•
Is there adequate space for the EB-34 near the copier?
Make sure there is enough space at the back and on both sides so that cables do not interfere with use or service of
the copier (for example, clearing a paper jam).
Figure 1:
Space requirement for the EB-34
•
Is a dedicated, grounded electrical outlet for the EB-34 available near the copier?
Do not run the EB-34 and the copier on the same circuit. If the customer has provided one, use a surge suppressor
for the EB-34.
•
Is the network functioning? (See the network administrator.)
Setting customer expectations
When the site is ready, installation of the EB-34 takes about 1 hour. Inform the customer of the following:
•
Some nodes on the network may be unavailable during service.
•
The network administrator must be available during the installation for network connectivity.
Equipment downtime and impact on the network can be minimized if the network administrator installs a network
connector for the EB-34 and confirms network functionality with the connector in place before the date scheduled
for the EB-34 installation.
•
The network administrator must have a networked computer available during the installation. The appropriate
software must be installed in advance. Documentation for the networked computer and the network operating
software should be available.
•
The network administrator must install the user software shipped with the EB-34 onto networked Windows and
Mac OS computers that will print to the EB-34 (user documentation is also included).
1
20cm+ (8 in.)
2
EB-34
3
Connector panel
4
Side panel
Important:
Will the network be available at the time of installation? (See the network administrator.)
1
3
4
1
2