27
Installation and Service Guide: Color Controller E-85A
Installing hardware
Figure 9:
USB connection between the printer and the E-85A
5
Set the switch on the printer interface to the ON position.
6
Power on the printer.
The E-85A will automatically start up.
To disable the power synchronization
1
Turn off the printer using the main power switch.
Wait until the E-85A shuts down.
2
Make sure that the power switch on the connector panel of the E-85A is OFF position (|).
A
printer connector panel
B
E-85A connector panel
1
Type A USB connectors
3
Type B USB port on the main printer interface board
2
USB cable
4
Switch on the main printer interface board:
OFF position (default)
Important:
Do not change the switch position when the E-85A is powered on.
A
B
1
2
3
4
