EFI E-45, Инструкция по установке и обслуживанию, Страница: 89 / 126

89 Installation and Service Guide: Color Controller E-45
Performing Backup and Restore
When you back up the system configuration, you save a configuration file that includes one or more of the following:
•
Fiery System Settings
• Color Settings
• Preflight Presets
• Command WorkStation settings (if you are using a keyboard, monitor, and mouse)
•
FreeForm/VDP resources
• Virtual Printers
•
Server Presets
• Fonts
• Job Log
Note:
Those settings you do not choose are not saved for restore.
If you cannot create a configuration file, ask the site administrator to archive custom color profiles, preflight presets,
FreeForm masters, customer-installed fonts, and the Job Log to removable media or a network location.
To save the system configuration using Command WorkStation
1
Ask the site administrator to print the Job Log, Server Configuration page, and Font List (if possible).
2
Launch Command WorkStation and connect to the E-45 with Administrator privilege.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
3
Select
Device Center
>
General
>
Tools
>
Backup & Restore
, and click
Backup
>
Next
.
4
In the
Backup & Restore
dialog box, select the settings you want to back up.
5
Enter a file name and location, specify if you want to add the date to the file name, and then click
Backup
.
6
Click
Finish
.
To save the system configuration using WebTools
1
Ask the site administrator to print the Job Log, Server Configuration page, and Font List (if possible).
2
Start a web browser and access the E-45 by entering the server name or IP address of the E-45.
3
From WebTools, select
Configure
tab >
Launch Configure
.
4
Log on with Administrator privileges and click
OK
.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
5
On the left side, choose
Fiery Server
>
Backup
.