S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
35
Windows (WINS) Setup
For setting up the WINS service, characters allowed in the text fields are uppercase letters,
numerals, space, and the following characters:
- _ . ~ ! @ # $ % ^ & ( ) { } \ ' ,
Use WINS
This option enables Server Message Block (SMB), the file and printer sharing protocol built
into Windows, which allows the E-42B to be listed on the network so that Windows
computers can print to a particular print connection (Hold, Print, or Direct) on the E-42B
without any other networking software.
Broadcasts from SMB devices cannot pass across a router without a WINS name server.
Setting up the WINS name server is outside the scope of this document. To find out if a name
server is available, contact your network administrator.
WINS Server IP Address
Automatic, Manual
This option appears if you enabled Use DHCP to automatically obtain the IP address of the
E-42B. If you select Manual, enter the IP address.
Netbios Name
Default Name
The Netbios name appears on the network for accessing the E-42B through SMB. The
default name is the same as the server name assigned in Server Setup (see
Workgroup or Domain
Enter the name of the workgroup or domain.
Comments
Server comments (optional) contain information about the printer. These comments are listed
in the E-42B Properties in Network Neighborhood and can be a maximum of 15 characters.
AppleTalk Setup
Enable AppleTalk
Choose this option if you have an AppleTalk network connected to the E-42Bto enable the
E-42B to communicate over AppleTalk for font downloads only.
Current AppleTalk Zones
List of zones
