User Manual
6
NOTE:
NOTE symbol indicates important safety instructions, which if not
correctly followed, could result in some damage or the destruction of
the inverter.
CAUTION:
CAUTION, RISK OF ELECTRIC SHOCK symbol indicates important
safety instructions, which if not correctly followed, could result in
electric shock.
CAUTION:
CAUTION, HOT SURFACE symbol indicates safety instructions, which
if not correctly followed, could result in burns.
2.2 General Safety Instructions
WARNING:
Only devices in compliance with SELV (EN 69050) may be connected
to the RS485 and USB interfaces.
WARNING:
Please don't connect PV array po) or negative(-) to ground, it
could cause serious damage to the inverter.
WARNING:
Electrical installations must be done in accordance with the local and
national electrical safety standards.
WARNING:
Do not touch any inner live parts until 5 minutes after disconnection
from the utility grid and the PV input.
WARNING:
To reduce the risk of fire, over-current protective devices (OCPD) are
required for circuits connected to the Inverter.
The DC OCPD shall be installed per local requirements. All
photovoltaic source and output circuit conductors shall have
disconnects that comply with the NEC Article 690, Part II.
