User Manual
22
4.3.6 CT connections (optional)
This inverter has integrated export limitation functionality. To use this function, a CT must be
installed, if use the CT, please reference below picture. The CT should be fitted around the
live conductor on the grid side of the main incoming consumer unit. Use the directional flow
indication arrow on the CT to ensure it is fitted in the correct orientation. The arrow should
be pointing towards the grid , not the load.
Pin
Description
Pin
Description
1
CT positive electrode
3
NC
2
CT negative pole
4
NC
Please follow below figure to assemble CT connector.
Figure 4.23 CT connector
