Effekta AX M2 Series, Руководство пользователя

Страница: 63 / 132

Innovating power.
Connection – Page 63
Solar inverter | V1.7
9.4 Connecting a photovoltaic system
Recommended cable sizes:
Model
Max.
current
Cable diameter
Tightening torque
3KW 60A 6mm²
1.2~1.6 Nm
5KW 80A 10mm²
Step 1
Remove ca. 10 mm of the isolation from
the plus and minus lines.
WARNING
Risk of injury due to electricity!

Install a separate DC isolating device between the inverter and the PV
module.

All the wiring must be carried out by qualified personnel.

For system safety and efficient operation, it is very important that suitable
cables are used for the connection of the PV module.

Ensure that the inverter power source is disconnected before beginning
with the wiring for the device.