If the “Synchronize with server” toggle is set to “ON” the gateway will automatically synchronise the
measurements taken by sensors with Efento Cloud. If there are any disturbances in the communication,
gateway will resend the missing measurements to the Cloud. For instance, if a sensor was out of gateway’s
range for some time, gateway will download the data from its memory and send it to the cloud once the
connection is reestablished. If the gateway was not able to send the data due to Internet connection issues, it
will also resend it once the connection is reestablished.
Key in the Organisation Token to assign your gateway to Efento Cloud account
If you do not want the gateway to automatically synchronise the measurements with Efento Cloud or you
want it to synchronise only the measurements from the selected sensors, set the “Synchronise with server”
toggle to “OFF”. Go to the “Sensors” tab and select measurements from which sensors should be
synchronised with the server by manually setting the toggles in the “Saving” column to “ON”.
You can manually select which sensors should synchronise the data with Efento Cloud
Sending data to a custom server
You can set Efento Gateway to send the data to a custom server. Efento Gateway will send the data over
http / https (REST API - POST). In order to set the gateway to work with a custom server, in the “Connection
to server” field select “Custom settings”. Fill in the server address (either domain or IP) in the “Server
address” field. If you want Efento Gateway to send the data to a custom endpoint, Set the “Custom API
endpoint” toggle to “ON” and key in the endpoint. Otherwise, the gateway will send the data to
“/api/v2/measurements”.
