EEC SE 7430, Руководство пользователя

Страница: 22 / 106

14
2. Getting Started
This section contains information for the unpacking, inspection, preparation for use and storage of
your EEC product.
2.1.
Unpacking and Inspection
2.1.1 Packaging
Your instrument was shipped in a custom foam insulated container that complies with ASTM
D4169-92a Assurance Level II Distribution Cycle 13 Performance Test Sequence
If the shipping carton is damaged, inspect the contents for visible damage such as dents, scratches
or broken display. If the instrument is damaged, notify the carrier and EEC's customer support
department. Please save the shipping carton and packing material for the carriers inspection. Our
customer support department will assist you in the repair or replacement of your instrument.
Please do not return your product without first notifying us .

Please retain all of the original packaging materials.
2.1.2 Returning the Instrument
When it is necessary to return the instrument for servicing or calibration, repackage the
instrument in its original container, please include all accessories and test leads. Indicate the
nature of the problem or type of service needed. Also, please mark the container "FRAGILE" to
insure proper handling.
If you do not have the original packaging materials, please follow these guidelines:

Wrap the instrument in a bubble pack or similar foam. Enclose the same information as
above.

Use a strong double-wall container that is made for shipping instrumentation. 350 lb. test
material is adequate.

Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all sides of
the instrument. Protect the control panel with cardboard.

Seal the container securely.

Mark the container "FRAGILE" to insure proper handling.
2.2 Installation
2.2.1 Work Area
Locate a suitable testing area and be sure you have read all safety
instructions for the operation of the instrument and suggestions on the
test area set-up in the Safety section. Make sure the work area you choose
has a three-prong grounded outlet. Be sure the outlet has been tested for proper wiring before
connecting the instrument to it.