temperature control
box assembly
R glass shelf
assembly
small tray
large tray
vegetable basket
shelf glass
vegetable basket
adjustable foot
*All images in this instruction manual are for indication only; please refer to your individual unit fordetails.
4.
OPERATION
4.1
Switching On Your Unit
◆
The temperature selector knob is located on the right hand sidewall of the refrigerator interior
Setting
“
Min
”
：
Less Cool Temperature
Setting
“
Med
”
：
Normal Operation(adequate for most situations)
Setting
“
Max
”
：
Coolest Temperature
◆
During high ambient temperatures e.g. on hot summer days. It may be necessary to set the
thermostat to the Coolest setting (position “Max”).This may cause the compressor running
continuously in order to maintain a low temperature in the cabinet.
◆
For the first time you install your refrigerator, set the thermostat knob at “Med”.
Give your refrigerator time to cool down completely before adding food. It is the best to wait
24 hours before adding food. The thermostat knob controls the temperature.
4.2
Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has
become more pronounced since the introduction of CFC free gases. This is not a fault and will not
affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
