Edwards EXT250 Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 42

Edwards EXT250 Series Скачать руководство пользователя страница 37

© Edwards Limited 2007. All rights reserved.

Page 31

Edwards and the Edwards logo are trademarks of Edwards Limited.

Service, Spares and Accessories

B722-01-880 Issue K

7

Service, Spares and Accessories

7.1

Introduction

Edwards products, spares and accessories are available from Edwards companies in Belgium, Brazil, China, France,
Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom, U.S.A and a world-wide network of distributors.
The majority of these centres employ Service Engineers who have undergone comprehensive Edwards training
courses.

Order spare parts and accessories from your nearest Edwards company or distributor. When you order, state for each
part required:

z

Model and Item Number of your equipment

z

Serial number

z

Item Number and description of part.

7.2

Service

Edwards products are supported by a world-wide network of Edwards Service Centres. Each Service Centre offers a
wide range of options including: equipment decontamination; service exchange; repair; rebuild and testing to factory
specifications. Equipment which has been serviced, repaired or rebuilt is returned with a full warranty.

Your local Service Centre can also provide Edwards engineers to support on-site maintenance, service or repair of
your equipment.

For more information about service options, contact your nearest Service Centre or other Edwards company.

7.3

Spares

7.3.1

ISX inlet-screen

An inlet-screen is fitted to your pump as supplied to prevent damage from the entry of debris into the pump. The
Item Numbers of replacement inlet-screens are given below. Select the inlet-screen according to the pump inlet-
flange size. You cannot replace the inlet-screen on an EXT70 pump with an NW inlet-flange.

7.3.2

WCX water-cooler

A water-cooler can be fitted to the EXT pump. Please refer to Section 3 to check the suitability of water cooling for
a particular application. Pumps with a Conflat flange are supplied with a water-cooler.

Flange size

Inlet-screen

Item Number

DN63ISO-K/DN63CF

ISX63

B580-51-005

DN100ISO-K/DN100CF

ISX100

B580-51-001

Pump

Water-cooler

Item Number

EXT70/EXT250

ISX63

B736-00-121

«
...
35
36
37
38
39
...
»

Содержание EXT250 Series











































Отзывы:

Нет отзывов