Edwards ELD500 Series, Инструкция по эксплуатации

Страница: 16 / 121

D13510840D - RC Remote control
Page 6
The ELD500 RC Wireless version enables remote operation up to a distance of 100 m,
depending on reception conditions. The integrated rechargeable battery enables over 8
hours of operation, depending on the battery level.
The ELD500 RC Wired version enables remote operation of the leak detector in question up
to a distance of 28 meters using a connection cable.
The leak rates can be displayed in digits or in a curve on the 3.5" colour display.
Measured values of up to several hours of recording can be stored in an internal memory. The
data storage interval is adjustable. The data can easily be downloaded to a USB stick via the
integrated USB interface to save it.
An internal trigger can be set to provide a warning if the maximum leak rates are exceeded.
An optical warning is shown on the display and an acoustic warning signal with variable pitch
proportionally to the leak rate is sounded on the integrated loudspeaker or the connected
headphones.
Operating Elements
Figure 1 ELD500 RC
POWER button
ELD500 RC Wireless: Power switch. After pressing and briefly
holding the switch, the operating LED lights up as confirmation and
flashes when the remote control is ready for use.
Switch off by pressing and holding the button for more than
2 seconds.
ELD500 RC Wired: The remote control turns on when the cable is
plugged in.
Pressing the Power button turns the display of the remote control
on and off.
START button
Starts the leak test of the leak detector (see Operating the leak
detector ).
(See the leak detector Technical Manual, and observe the menu
option "Control location").
STOP button Ends leak testing (see Operating the leak detector ).
ZERO button Activates the ZERO function (see Operating the leak detector ).
1. START button
2. ZERO button
3. POWER button
4. Touch Display
5. STOP button
6. Operating LED
7. Charge LED