ACCESSORIES:
PD532
Lifting Pencil Pod
Holder for the LP250. Attach to any
Edsyn Station.
LP250
Lifting Pencil
Vacuum Pick-Up Tool. Low Static.
Comes with two types of suction cups.
Needs vacuum source.
Symptom
Cause
Remedy
No power
Pump won't run.
Pump running but weak
or no air output.
Check that all connections, switches and power
source are properly installed and working.
Replace fuse at bottom.
Replace motor
a) Make sure all connections are
properly installed. Replace cracked
hoses and O-rings.
b) Replace with clean filters.
c) FA069 should be connected to Air
Control Valve.
d) Clean Air passages along RS321
and Tip.
e) Clean CC355.
f) send to factory
Blown fuse
Damaged motor
a) Leak along the air lines
and O-rings inside
Heater assembly.
b) Dirty filter elements.
c) No air connection.
d) Clogged RS321 or
clogged tip.
e) Dirty CC355 Chamber
Coil.
f) Damaged diaphram
POWER SUPPLY
TROUBLESHOOTING
For Factory Repair, ship to: EDSYN INC.Customer Service Department
15958 Arminta Street, Van Nuys, CA 91406-1896
All manuals and user guides at all-guides.com