7
Assigning the Instruments on Your Strike Module
1)
Press
KIT
to show the Kit menu and select the
desired kit to edit
2)
Press the
VOICE
button
3)
Activate the
NOTE CHASE
button and hit the kick
drum pad to select it
OR
Swap the
TRIG
type at the top of the screen to
Snare
Head
using the
data dial
4)
Press
F4/INST
to open the instrument list, then
press
F4/USER
again
to select a user instrument from
the SD card
5)
Verify that you are on the correct instrument Layer.
LAYER A
is recommended if using the instrument
alone. Swap the layer with
F1
or
F2
if necessary
6)
Using the
cursors
, select the
PP13x7 Lite
or
PP13x7
Max
category from the left panel
7)
Use the
cursors
to navigate to the right panel and
select an instrument. The sounds can be auditioned
while this menu is open by hitting the pad
8)
Swap to the
Snare Rim
trigger using either the
Note
Chase
or
TRIG
selection and follow
steps 4 - 7
again,
where necessary
9)
Press
F6/BACK
when finished to return to the
VOICE
screen and continue to make any other
adjustments
(see
Recommended Settings
for more information)
Note:
Don’t forget to
SAVE
your kit from the
KIT
screen once you have made your selections!
